The 30MC 3-Inch Midrange Component Speaker can be installed in most 2-way component systems to capture midrange frequencies and elevate the vehicles sound system performance.
Capture Midrange Frequencies
Often in a 2-way component system, theres a dip in the midrange frequencies reproduced between the door speaker and where the tweeter crosses into the passband. This can cause the music to miss most of the instruments and vocals that are found in the midrange frequency.
The 30MC Midrange Component Speaker captures the higher midrange frequencies by integrating a dynamic third dimension into the sound system that seamlessly blends between the door speaker and tweeter. This brings the vocal element up, setting the vehicles sound stage to the optimal position of front and center.
The 30MC includes two small and sleek speakers that measure 3-inches with a mounting depth of 1 5/16-inch. The slim mounting depth allows for easy installation into most vehicle applications.
While this product is not a direct-fit solution for any vehicle (some installation may require vehicle-specific adapter plates) it can be professionally installed in a dash, A-pillars, or doors to capture midrange frequencies and project the sound to the front and center of the vehicle.
Pair it with a Digital Processor
The 30MC does not include a crossover, so for best results in music performance, pair the 30MC with Alpines PXE-0850S Advanced Wireless Digital Signal Processor. Customize the crossovers and make precise adjustments to the time correction for a well-balanced response and a proper center sound stage.
Build Your Perfect Sound System
The 30MC is the cherry on top for sound system builders looking for high-quality performance. The 30MC is a perfect power match for Alpines S, R, or X-Series sound system. Add a dynamic third component into an existing 2-way component system for higher-quality music experience.
- (2) 3-inch Speakers
- High-Strength Cast Aluminum Basket
- Polypropylene Cone
- Rubber Surround
|Max RMS Power Capacity: 50W RMS
|Peak Power Capacity: 150W RMS
|Cone Material: Polypropylene
|Magnet Type: Ferrite
|Resonant Frequency Response: 125 Hz
|Frequency Response: 100Hz-20kHz
|Sensitivity: 84dB (1W / 1m)
|Nominal Impedance: 6 Ohm
|Terminal Type: Male Quick Disconnects
|Mounting Depth: 1 5/16-inch
|Cutout Diameter: 2 1/2-inch
|Outer Diameter: 3.1-inch
|Crossover: (Not Included) DSP Recommended
|Crossover Recommendation: BP Filter (Low = 250Hz @ -12dB/Oct) (High = 2.4kHz @ 12dB/Oct)
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.