Skip disability assistance statement.

Welcome to our website! As we have the ability to list over one million items on our website (our selection changes all of the time), it is not feasible for a company our size to record and playback the descriptions on every item on our website. However, if you have a disability we are here to help you. Please call our disability services phone line at 1-800-123-4567 during regular business hours and one of our kind and friendly personal shoppers will help you navigate through our website, help conduct advanced searches, help you choose the item you are looking for with the specifications you are seeking, read you the specifications of any item and consult with you about the products themselves. There is no charge for the help of this personal shopper for anyone with a disability. Finally, your personal shopper will explain our Privacy Policy and Terms of Service, and help you place an order if you so desire.

Monoblock Class D Marine Subwoofer Amplifier, 600 W

JL Audio M6001

Features

  • Patented Technology: Single Cycle Control. (U.S. Patent #6,084,450*)
  • Inputs: Differential-balanced with RCA jack inputs
  • On-board Crossover: State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continuously variable cutoff frequency selection from 50 - 500 Hz (defeatable).
  • Preamp Output: Buffered pass-through type

Quick Specs

  • Type: Amplifiers
  • Width: 8.52"
  • Height: 2.05"
  • Depth: 7.09"
  • Energy Star Rated: No

See More

 

Monoblock Class D Marine Subwoofer Amplifier, 600 W x 1 @ 2 / 400 W x 1 @ 4 - 14.4V


This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 load (14.4V, 1% THD).


Technology

Dynamic Motor Analysis - DMA Optimized Motor

JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.


NexD™ Switching Technology

NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs.


Advanced Rollback Protection

JL Audio's exclusive Advanced Rollback Protection circuit monitors the amplifier's thermal condition and adjusts amplifier operation to eliminate annoying amplifier shut-down events.


Features

  • Patented Technology: Single Cycle Control. (U.S. Patent #6,084,450*)
  • Inputs: Differential-balanced with RCA jack inputs
  • On-board Crossover: State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continuously variable cutoff frequency selection from 50 - 500 Hz (defeatable).
  • Preamp Output: Buffered pass-through type
  • Infrasonic Filter: 24 dB/octave Butterworth @ 30 Hz, defeatable
  • Dual mono subwoofer output connections: Accept up to 12 AWG wire
  • +12V and Ground connections: Accept up to 4 AWG wire
  • Rated Power: 600 W RMS @ 2 ohm (14.5V)
  • Rated Power 14.4 V: 400W RMS x 1 @ 4 ohms 600W RMS x 1 @ 2 ohms
  • Rated Power 12.5 V: 300W RMS x 1 @ 4 ohms 500W RMS x 1 @ 2 ohms
  • THD at Rated Power: 1% @ 2 ohm
  • S/N Ratio: >87 dB referred to rated power (A-weighted, 20 Hz-20 kHz noise bandwidth), >67 dB referred to 1W (A-weighted, 20 Hz-20 kHz noise bandwidth)
  • Frequency Response: 7 Hz - 500 Hz (+0, -1dB)
  • Damping Factor: >1000 @ 4 ohms / 50 Hz, >500 @ 2 ohms / 50 Hz
  • Input Range: 100mV - 4V RMS
Rated Continuous (RMS) Power @ 14.4 V
@ 4 400 W RMS x 1
@ 3 500 W RMS x 1
@ 2 600 W RMS x 1
@ 1.5 N/A
Rated Continuous (RMS) Power @ 12.5 V
@ 4 300 W RMS x 1
@ 3 400 W RMS x 1
@ 2 500 W RMS x 1
@ 1.5 N/A
General Specifications
Frequency Response 7 Hz - 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >59 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 >1000 / 50 Hz
Damping Factor @ 2 >500 / 50 Hz
THD+N @ Rated Power <1% @ 2 per Ch.
Input Voltage Range @ RCA Inputs 100 mV - 4 V RMS
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 50 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s) Low-Pass only
Filter Slope(s) 12/24 dB/octave
Filter Frequency Range 50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometer Yes
Filter Defeat Function Yes
Infrasonic Filter 30 Hz, defeatable
Bass Boost EQ (0 to +12 dB @ 45 Hz) No
Output Polarity Switch No
Remote Subwoofer Level Control Optional (HD-RLC)
Pass-Through Preamp Output Buffered
Physical Specifications
Height (H) 2.05 in / 52 mm
Width (W) 8.52 in / 216 mm
Depth (D) 7.09 in / 180 mm
Net Weight 4.6 lb / 2.06 kg

Quick Specs


  • Appearance

  • Type: Amplifiers

  • Dimensions

  • Width: 8.52"
  • Height: 2.05"
  • Depth: 7.09"

  • Features

  • Energy Star Rated: No

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Electronics can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new electronics should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.